Posted on

marijuana grow room blueprints

Marijuana grow room blueprints

Designing a marijuana grow room comes with many different options in terms of location, space needed, watering, lighting, ventilation, and more equipment needs. Knowing the components you need can help you understand what goes into an efficient grow room setup.

Location, Location, Location

Grow room design begins with choosing a prime space for cultivation. Greenhouse grows are the most energy-efficient location you can find since they use the sun’s free light and energy over indoor facilities that require lights to compensate.

From Soil to Oil

Building your own marijuana grow room to your exact specifications and within your budget can be a satisfying and productive experience. The sheer variety of options available in grow room design can give you free rein over how basic or advanced you need your space.

Marijuana grow room blueprints

The cornerstone to creating any commercial grow facility, such as those needed in cannabis cultivation, requires a well-thought-out layout and optimum mechanical systems. As an example, with an indoor cultivation facility design the mistake of under-sizing the environmental controls are an all too common occurrence. The cultivation facility design must feature an HVAC system with redundancy and a backup power source. In addition, they should be cleanable outside of the grow rooms and be easy to repair. The units remove massive amounts of moisture caused by the abundant cannabis plant growth, so it is imperative that they have properly sized units to meet the needs of the grow room’s space.

What’s Required for a Grow Facility Design?

Within the confines of the indoor grow facility, air circulation keeps the plant’s canopy slightly swaying because of the artificial breeze. The upper flowers in a vertical grow are then prevented from getting excessively hot. Clearly, the environmental controls are of paramount importance or cannabis crop loss can occur and pests from clones can easily enter the facility if things are not kept at consistent levels. Engineering and installation are one of the biggest investments (if not the biggest) of any commercial grow room design plan. You cannot cut corners, or the financial losses quickly become insurmountable.

The Typical Craft Grow Facility — Room Division

In the past, 1,000 tons of refrigeration capacity was needed for 80,000 to 10,000 square foot facilities such as a data center, hospital, or school. A grow room requires similar, but they are dramatically different. A grow room has a much higher latent load (moisture/dehumidification load). The humidity in the grow space must undergo more cooling to effectively condense the humidity off the cooling coil. A much colder chilled water temperature is needed. When growing cannabis, the lights-out mode means that growers must dry the air and then reheat it, so the grow room does not start to over-cool. The reheat can use free energy obtained from the dehumidification process when the right HVAC system is used. Having an experienced company, such as Mintropy, handle such key specifics is necessary for the success of any commercial cannabis grow facility.